Altima+ Stone Adhesive

Altima+ Stone Adhesive

Altima+ is a dripless surface adhesive that bonds granite, quartz, marble, sintered stone and porcelain. Also works with acrylic and polyester.

  • UV Stable
  • Dripless
  • 10:1
  • A wide range of colors

Altima+ is a super flexible, dripless/non-sag, low shrink, hard surfacing adhesive designed for the nearly seamless bonding of Natural Stone.

Altima+ is a two-part methacrylate, super flexible, dripless/non-sag, low shrink, low exotherm, ultra violet light stable, non-yellowing hard surfacing adhesive designed for the nearly seamless bonding of natural stone products.

Combined at a ratio of 10:1 (10 parts resin, one part activator), Altima+ has a working time of 10 to 15 minutes, with a 5 to 10 minute De-Roping Time, and achieves nearly 90 percent of its ultimate strength in 45 to 60 minutes at room temperature curing.

Altima+ offers a combination of high strength, stiffness, and toughness as well as the ability to bond very strongly to a wide variety of hard surface or inorganic materials.

Altima+ permits the seasoned fabricator the opportunity to apply the adhesive to vertical surfaces, as well as horizontal surfaces, without dripping, and upon gelation, gives the fabricator an extended window (5 to 10 minutes) to de-rope, or trim with a single bladed straight edge razor blade, the excess from the stone slab without ripping the adhesive out of the joint, nor damaging the surface of the stone.

Altima+ is available in colors from our Stone Collection viewable in the Stone Gallery

Refer to MSDS for safety and handling information.

Always wear disposable gloves and eye protection when working with adhesives or polishing compounds.

Resources